Propagating the errors of initial forest variables through stand- and tree-level growth simulators

Developments in the field of remote sensing have led to various cost-efficient forest inventory methods at different levels of detail. Remote-sensing techniques such as airborne laser scanning (ALS) and digital photogrammetry are becoming feasible alternatives for providing data for forest planning. Forest-planning systems are used to determine the future harvests and silvicultural operations. Input data errors affect the forest growth projections and these effects are dependent on the magnitude of the error. Our objective in this study was to determine how the errors typical to different inventory methods affect forest growth projections at individual stand level during a planning period of 30 years. Another objective was to examine how the errors in input data behave when different types of growth simulators are used. The inventory methods we compared in this study were stand-wise field inventory and single-tree ALS. To study the differences between growth models, we compared two forest simulators consisting of either distance-independent tree-level models or stand-level models. The data in this study covered a 2,000-ha forest area in southern Finland, including 240 sample plots with individually measured trees. The analysis was conducted with Monte Carlo simulations. The results show that the tree-level simulator is less sensitive to errors in the input data and that by using single-tree ALS data, more precise growth projections can be obtained than using stand-wise field inventory data.     

Phosphorus release from forest harvesting on an upland blanket peat catchment

The aim of this study was to investigate the release of phosphorus (P) to receiving waters resulting from harvesting 34-year-old lodgepole pine trees in an upland peat catchment. The study site was within a 25.3-hectare (ha) area, and was drained by a stream that received flows from ploughed furrows, mainly, via collector drains, and discharged directly to the salmonid Shrahrevagh River, Burrishoole, Co. Mayo, Ireland. The study site was divided into two parts: the upstream part was left intact and the downstream part was harvested in early Autumn 2005 following implementation of forest guidelines. Good management practices such as proper use of brash mats and harvesting only in dry weather were implemented. Two instrumented stations were established – one just upstream (US) and the other just downstream (DS) of the clearfelled area. The measurement of P concentrations at the two stations commenced in May 2005, two months before the harvesting started. The daily mean P concentration at the DS station increased from about 6 μg L⁻¹ of total reactive phosphorus (TRP) during pre-clearfelling to 429 μg L⁻¹ in August 2006. By October 2009, four years after clearfelling, the P concentrations at the DS station had returned to pre-clearfelling levels. In the first three years after harvesting, up to 5.15 kg ha⁻¹ of TRP was released from the harvested catchment to the receiving water; in the second year alone, 2.3 kg ha⁻¹ of TRP was released. Linear regression can be used to describe the relationship between TRP load and water discharge. About 80% of the total phosphorus (TP) in the study stream was soluble and more than 70% of the P release occurred in storm events, indicating that traditional buffer strips with widths of 15–20 m might not be efficient for P immobilization. The P concentrations were affected by antecedent weather conditions and highest concentrations occurred during storm events following prolonged drought periods. The water extractable phosphorus (WEP) contents in the soil were significantly higher below windrow/brash material than in brash-free areas, and whole-tree harvesting should be studied as one of the means to decrease P export from blanket peats.     

Use of polymorphisms in the γ-gliadin gene of spelt and wheat as a tool for authenticity control

Partial sequencing of the γ-gliadin gene of 62 spelt and 14 soft wheat cultivars was performed. Fifty-six of the 62 spelt cultivars and 13 of the 14 soft wheat cultivars were shown to exhibit the typical spelt or soft wheat γ-gliadin sequence, respectively. Exceptions were ascribed to crossbreeding of soft wheat and spelt. Using the typical soft wheat γ-gliadin sequence, two alternative DNA-based analytical methods were developed for the detection and quantification of spelt flour "adulteration" with soft wheat. A simple and fast detection of soft wheat in spelt flours could be achieved by restriction fragment length (RFLP) analysis. In combination with lab-on-a-chip capillary gel electrophoresis (LOC-CE) the soft wheat proportion could be estimated. Heteroduplex formation served as additional confirmation for the presence of spelt besides soft wheat. Hence, RFLP-LOC-CE constitutes a perfect analysis tool for the quality control of cereal seeds and pure cultivars. A precise quantification of soft wheat "adulterations" in spelt flour down to 1% could be achieved by the developed real-time PCR method. The calibration parameters of the real-time PCR assay fulfilled the minimum performance requirements of the European Network of GMO (genetically modified organisms) Laboratories (ENGL).     

Differentiation of refined and virgin edible oils by means of the trans- and cis-phytol isomer distribution

The differentiation of nonrefined (e.g., cold-pressed) and refined edible oils is an important task in food control because of the higher commercial value of the former. Here, we explored the suitability of the relative abundance of cis-phytol as a marker for authentication of nonrefined edible oils. Phytol, the tetramethyl-branched, monoenoic alcohol, is found widespread in nature as a part of chlorophyll. In chlorophyll, only trans-phytol is found. In this study, we present a method for the analysis of the phytol isomers, considering that traces of cis-phytol (contributing 0.1% to the phytol content) can be determined next to trans-phytol. For this purpose, phytol was gathered with the unsaponifiable matter from the oil, trimethylsilylated, and analyzed by gas chromatography coupled to mass spectrometry. With this method, 27 samples of edible oils (16 refined and 11 nonrefined edible oils) were analyzed for the abundance of cis-phytol relative to trans-phytol. In the nonrefined oils (e.g., olive oil, rapeseed oil, maize oil, and sunflower oil), cis-phytol contributed 0.1% (n = 3) or less (n = 8) to the phytol content. In contrast, the refined olive oils (n = 4) contained a share of 1.3-3% cis-phytol; the refined rapeseed oil (n = 3) contained a share of 0.7-1.0% cis-phytol; and the refined sunflower oil (n = 4) contained a share of 0.3-0.9% cis-phytol. Only one refined pomegranate kernel did not contain cis-phytol. The phytol concentration was not suited to distinguish nonrefined from refined oils. In contrast, our data suggest that the virtual absence of cis-phytol can be used as a marker for nonrefined (e.g., cold-pressed) edible oils.     

Short‐term degradation of semiarid grasslands—results from a controlled‐grazing experiment in Northern China

The assessment of grassland degradation due to overgrazing is a global challenge in semiarid environments. In particular, investigations of beginning steppe degradation after a change or intensification of the land use are needed in order to detect and adjust detrimental land‐use management rapidly and thus prevent severe damages in these sensitive ecosystems. A controlled‐grazing experiment was established in Inner Mongolia (China) in 2005 that included ungrazed (UG) and heavily grazed plots with grazing intensities of 4.5 (HG4.5) and 7.5 (HG7.5) sheep per hectare. Several soil and vegetation parameters were investigated at all sites before the start of the experiment. Topsoil samples were analyzed for soil organic C (SOC), total N (N_tot), total S (S_tot), and bulk density (BD). As vegetation parameters, aboveground net primary productivity (ANPP), tiller density (TD), and leaf‐area index (LAI) were determined. After 3 y of the grazing experiment, BD increased and SOC, N_tot, S_tot, ANPP, and LAI significantly decreased with increasing grazing intensity. These sensitive parameters can be regarded as early‐warning indicators for degradation of semiarid grasslands. Vegetation parameters were, however, more sensitive not only to grazing but also to temporal variation of precipitation between 2006 and 2008. Contrary, soil parameters were primarily affected by grazing and resistant against climatic variations. The assessment of starting conditions in the study area and the application of defined grazing intensities is essential for the investigation of short‐term degradation in semiarid environments.     

Physical properties of a Luvisol for different long‐term fertilization treatments: I. Mesoscale capacity and intensity parameters

The physical properties of a Luvisol derived from loess near Bonn, Germany, under different long‐term fertilization treatments were examined. For the investigation of the impact of farmyard manure (FYM) on soil strength at the mesoscale (100 to 300 cm³ soil cores), undisturbed samples were taken from two different depths (10 and 40 cm), either with no fertilization at all, with full mineral fertilization, with FYM only, and with both mineral and organic fertilization. We investigated hydraulic and mechanical parameters, namely precompression stress, pore‐size distribution, saturated hydraulic and air conductivity, and calculated pore connectivity. Long‐term organic fertilization resulted in significantly more and coarser pores which in addition were more conductant and mechanically stronger by trend. Mineral fertilization also increased pore volume by trend but not pore functionality. Mechanical strength generally increased with fertilization by trend, however, was reduced again when organic and mineral fertilization were combined. Nonetheless, FYM led to relatively higher soil strength as the FYM‐treated plots with lower bulk density attained similar soil strength as the unfertilized but denser plots and thus supported the soil‐improving impact of organic amendments. The subsoil physical properties were rather unaffected by fertilization, but were dominated by texture.     

A combined hydraulic and toxicological approach to assess re-suspended sediments during simulated flood events—part II: an interdisciplinary experimental methodology

Purpose

Flood events are expected to increase both in intensity and frequency due to climate change in the near future. From an environmental toxicology perspective, there is concern that such flood events could lead to the remobilization of contaminated sediment layers in rivers. The aim of this pilot study was to establish a novel and interdisciplinary framework combining methods of hydrodynamic engineering and ecotoxicological assessment to enable investigation of the potential risks associated with such remobilization events.

Materials and methods

Formulated sediment was prepared according to OECD guideline 218 and spiked with a mixture of four polycyclic aromatic hydrocarbons (phenanthrene, chrysene, pyrene, benzo[a]pyrene) at concentrations of 3.3?C8.3?mg?kg^?1 dry weight. Rainbow trout (Oncorhynchus mykiss) were exposed as test animals to re-suspended sediments in three out of five experiments. The experiments were carried out in an annular flume designed to investigate transport behaviour of fine-grained sediments. Several physicochemical (e.g. pH) and sedimentological (e.g. turbidity) parameters were measured to characterise environmental conditions and erosion behaviour of sediments. Furthermore, exposure concentrations were measured by means of an in vitro assay (7-ethoxyresorufin-o-deethylase (EROD), RTL-W1 cell assay) and chemical analysis.

Results and discussion

Preparation and spiking of large amounts of formulated sediments were feasible but not practical. Successful spiking could be confirmed by the bioanalytical methods with the spiked sediments showing significantly elevated EROD induction compared to control sediments. Conditions within the annular flume remained stable throughout all experiments and were adequate to support rainbow trout. Flood events were successfully simulated, resulting in re-suspension of formulated sediment. Different erosion behaviours of sediments during the simulated flood events were observed and could be associated with changes in microbial composition of sediments due to differences in storage conditions. Therefore, maintaining constant storage conditions of formulated sediments is crucial to enable consistency and comparability among erosion experiments.

Conclusions

This study clearly demonstrated the feasibility of a combined hydro-toxicological approach in support of the investigation of the potential ecotoxicological relevance of sediment re-suspension events. However, based on the results presented here, it is recommended to include additional physicochemical parameters, such as redox potential and conductivity, and to extend the experimental setup to natural sediments and different aquatic organisms. Future studies will use natural sediments containing representative microbial communities and extracellular polymeric substances to enable extrapolation from the annular flume to conditions in natural flowing waters.     

Reconciling 14C and minirhizotron‐based estimates of fine‐root turnover with survival functions

The turnover of fine‐roots is a crucial component for the input of C to the soil. The amount of root litter input is depending on estimates of turnover times from different techniques. Turnover times from fine‐root cameras (minirhizotrons) often yield 75% higher root litter input estimates than turnover times estimated with the bomb‐radiocarbon signature of fine roots. We introduce a generic framework for the analysis of fine‐root ¹⁴C with different survival functions. So far, mostly an exponential function has been used to estimate the turnover time and mean age of fine roots. In the context of the introduced survival function framework we clarify the terms turnover time, mean residence time, mean longevity, and mean age, which are commonly used in studies of root turnover. Using a unique time series of fine‐root ¹⁴C (Fröberg 2012), we test if survival functions other than the exponential function are better in accordance with turnover‐time estimates commonly found with other methods. A survival function that corresponds to a two‐pool model was best in agreement with minirhizotron‐based estimates (mean residence time of 1.9 y). We argue that using fine‐root ¹⁴C and minirhizotron time‐to‐death data together would give the best constraints on fine‐root turnover. At the same time this could allow quantifying systematic biases inherent to both techniques.     

The innate antiviral immune system of the cat: molecular tools for the measurement of its state of activation

The innate immune system plays a central role in host defence against viruses. While many studies portray mechanisms in early antiviral immune responses of humans and mice, much remains to be discovered about these mechanisms in the cat. With the objective of shedding light on early host-virus interactions in felids, we have developed 12 real-time TaqMan(?) qPCR systems for feline genes relevant to innate responses to viral infection, including those encoding for various IFNα and IFNω subtypes, IFNβ, intracellular antiviral factor Mx, NK cell stimulator IL-15 and effectors perforin and granzyme B, as well as Toll-like receptors (TLRs) 3 and 8. Using these newly developed assays and others previously described, we measured the relative expression of selected markers at early time points after viral infection in vitro and in vivo. Feline embryonic fibroblasts (FEA) inoculated with feline leukemia virus (FeLV) indicated peak levels of IFNα, IFNβ and Mx expression already 6h after infection. In contrast, Crandell-Rees feline kidney (CrFK) cells inoculated with feline herpes virus (FHV) responded to infection with high levels of IFNα and IFNβ only after 24h, and no induction of Mx could be detected. In feline PBMCs challenged in vitro with feline immunodeficiency virus (FIV), maximal expression levels of IFNα, β and ω subtype genes as well as IL-15 and TLRs 3, 7 and 8 were measured between 12 and 24h after infection, whereas expression levels of proinflammatory cytokine gene IL-6 were consistently downregulated until 48h post inoculation. A marginal upregulation of granzyme B was also observed within 3h after infection. In an in vivo experiment, cats challenged with FIV exhibited a 2.4-fold increase in IFNα expression in blood 1 week post infection. We furthermore demonstrate the possibility of stimulating feline immune cells in vitro with various immune response modifiers (IRMs) already known for their immunostimulatory properties in mice and humans, namely Poly IC, Resiquimod (R-848) and dSLIM?, a synthetic oligonucleotide containing several unmethylated CpG motifs. Stimulation of feline PBMCs with dSLIM? and R-848 effectively enhanced expression of IFNα within 12h by factors of 6 and 12, respectively, and Poly IC induced an increase in Mx mRNA expression of 28-fold. Altogether, we describe new molecular tools and their successful use for the characterization of innate immune responses against viruses in the cat and provide evidence that feline cells can be stimulated by synthetic molecules to enhance their antiviral defence mechanisms.